Personal and Expert advice
Superfast Shipping
Shipper worldwide
TPS2855/08 Tuning Volume Compensation LOSI-BWS, set
TPS2855/08 Tuning Volume Compensation LOSI-BWS, setTPS2855/08 Tuning Volume Compensation LOSI-BWS, setTPS2855/08 Tuning Volume Compensation LOSI-BWS, setTPS2855/08 Tuning Volume Compensation LOSI-BWS, setTPS2855/08 Tuning Volume Compensation LOSI-BWS, set

TPS2855/08 Tuning Volume Compensation LOSI-BWS, set

In stock
Order now and it will be sent next Tuesday
TPS Racing
Product code TPS2855/08
EANcode: 8719697079809

€17.90 €16.90

Tuning Shock Absorber Compensation BWS-LOSI.

The shock Absorber has standard no, (suffient), volume compensation, (which equals the volume of the shock Absorber rod coming in and going out the damper housing, so there must always be an amount of air in the damper but this can mix with the oil which means very bad damping.

This POM compensation set is very easy to install, simply mount this in the damping housing, no modification needed!

Fill and Bleed:

  • 1)   Remove the oil when necessary
  • 2)   Fill the damper up to 10 mm below the rim with new oil
  • 3)   Now gently push the rod upwards to just below the oil level
  • 4)   Now gently pull the rod back down
  • 5)   Now let the damper stand upright for 5-15 minutes so that the air bubbles can come out, (the time depends on the oil thickness)
  • 6)   Repeat steps 4 and 5 until there are no more air bubbles in the oil.
  • 7)   Now push the rod halfway up the damper
  • 8)   Now gently press the red cap without O-ring on so that the excess oil can come out
  • 9)   Remove the cap, fit the O-ring and push the cap into the body as far as it will go
  • 10) Now screw the cap on.
  • 11) The bound and rebound can be set by the amount of oil.

When mounting the lower parts, we recommend that you lubricate the bush and oil seal with a little silicone oil..

Kit content:

  • 4 x POM Compensation cap
  • 4 x O-ring
  • 4 x Compensation foam

Suitable for:

  • LOSI 5T models
  • TLR 5B
  • BWS models
  • Rovan LT models
  • King Motor X2 models
    Standard Silicone Oil
    ShockThicknessProduct Nr
    Front30WTTLR74023
    Rear30WTTLR74023

    About 30 cc of silicone oil is needed to fill a shock absorber.

    Write Your Own Review
    You're reviewing:TPS2855/08 Tuning Volume Compensation LOSI-BWS, set
    Your Rating

    More interesting products for you?