Personal and Expert advice
Superfast Shipping
Shipper worldwide
TPS2855/01 Shock Shaft seal LOSI 5T-BWS, Set
TPS2855/01 Shock Shaft seal LOSI 5T-BWS, SetTPS2855/01 Shock Shaft seal LOSI 5T-BWS, SetTPS2855/01 Shock Shaft seal LOSI 5T-BWS, Set

TPS2855/01 Shock Shaft seal LOSI 5T-BWS, Set

In stock
Order now and it will be sent next Tuesday
TPS Racing
Product code TPS2855/01
EANcode: 8719697076633

€26.90 €24.90

Tuning lower shock absorber closure.

The standard lower shock absorber closure of BWS and LOSI 5T models are equipped with various O-rings and bushings which often leads to wear and leakage.

This set is equipped with an extra long supporting POM guide bush in combination with an oil seal. This ensures a very smooth damper that does not leak anymore. Can be easily fitted in the excisting cap and shock housing addition.

Fill and Bleed:

  • 1)   Remove the oil when necessary
  • 2)   Fill the damper up to 10 mm below the rim with new oil
  • 3)   Now gently push the rod upwards to just below the oil level
  • 4)   Now gently pull the rod back down
  • 5)   Now let the damper stand upright for 5-15 minutes so that the air bubbles can come out, (the time depends on the oil thickness)
  • 6)   Repeat steps 4 and 5 until there are no more air bubbles in the oil.
  • 7)   Now push the rod halfway up the damper
  • 8)   Now gently press the red cap without O-ring on so that the excess oil can come out
  • 9)   Remove the cap, fit the O-ring and push the cap into the body as far as it will go
  • 10) Now screw the cap on.
  • 11) The bound and rebound can be set by the amount of oil.

During assembly, we recommend lubricating the guide bushing and oil seal with a little silicone oil.

Set content:

      • 4 x guided bus
      • 4 x oil seal

Suitable for:

      • LOSI 5T models
      • BWS models
      • Rovan LT models
      • King Motor X2 models
    Standard Silicone Oil
    ShockThicknessProduct Nr
    Front30WTTLR74023
    Rear30WTTLR74023

    About 30 cc of silicone oil is needed to fill a shock absorber.

    Write Your Own Review
    You're reviewing:TPS2855/01 Shock Shaft seal LOSI 5T-BWS, Set
    Your Rating

    More interesting products for you?