Personal and Expert advice
Superfast Shipping
Shipper worldwide
TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.
TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.

TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.

In stock
Order now and it will be sent next Tuesday
TPS Racing
Product code TPS2855
EANcode: 8719697076435

€26.90 €24.90

Tuning lower shock absorber closure.

The standard plastic shock absorber closure at the bottom of the models mentioned is equipped with various O-rings and bushes, which often leads to wear and leaks. 

These lower parts consist of 2 aluminum closures, extra long supporting guide bushes of form-retaining POM in combination with oil seals. This means a very flexible damper that no longer leaks and provides much more support than the standard parts.

Fill and Bleed:

  • 1)   Remove the oil when necessary
  • 2)   Fill the damper up to 10 mm below the rim with new oil
  • 3)   Now gently push the rod upwards to just below the oil level
  • 4)   Now gently pull the rod back down
  • 5)   Now let the damper stand upright for 5-15 minutes so that the air bubbles can come out, (the time depends on the oil thickness)
  • 6)   Repeat steps 4 and 5 until there are no more air bubbles in the oil.
  • 7)   Now push the rod halfway up the damper
  • 8)   Now gently press the red cap without O-ring on so that the excess oil can come out
  • 9)   Remove the cap, fit the O-ring and push the cap into the body as far as it will go
  • 10) Now screw the cap on.
  • 11) The bound and rebound can be set by the amount of oil.

When mounting the lower parts, we recommend that you lubricate the bush and oil seal with a little silicone oil..

Set content:

  • 2 x Aluminum cap
  • 2 x POM guided bushing
  • 2 x Oil seal

Suitable for:

  • LOSI 5T models
  • TLR 5B
  • BWS models
  • Rovan LT models
  • King Motor X2 models
    Standard Silicone Oil
    ShockThicknessProduct Nr
    Front30WTTLR74023
    Rear30WTTLR74023

    About 30 cc of silicone oil is needed to fill a shock absorber.

    Write Your Own Review
    You're reviewing:TPS2855 Tuning lower shock closure LOSI 5T-BWS, 2 pcs.
    Your Rating

    More interesting products for you?